This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
pidflightlap:wifi [2017/08/16 11:18] cmengler [DT-06] |
pidflightlap:wifi [2017/08/16 11:38] (current) cmengler [DT-06] |
||
---|---|---|---|
Line 6: | Line 6: | ||
By default the DT-06 module is set to **9600** baud rate and TCP port **9000**. The DT-06 module must be configured to **115200** baud rate. | By default the DT-06 module is set to **9600** baud rate and TCP port **9000**. The DT-06 module must be configured to **115200** baud rate. | ||
- | - Ensure your DT-06 is connect to the Arduino Nano. | + | - Power up the lap timing device with the DT-06 module connected. |
- | - Power up the lap timing device. | + | - Connect to the WiFi network, by default it will be called "Doit_WiFi_XXXXXX". |
- | - Connect to the WiFi network (by default it will be called "Doit_WiFi_XXXXXX"). | + | |
- Open your web browser to **http://192.168.4.1** {{ :pidflightlap:dt-06_main.png?direct&360 |}} | - Open your web browser to **http://192.168.4.1** {{ :pidflightlap:dt-06_main.png?direct&360 |}} | ||
- | - Navigate to **Module** -> **Serial**, set the **BaudRate** to **115200** {{ :pidflightlap:dt-06_serial.png?direct&360 |}} | + | - Navigate to **Module** -> **Serial**, set the **BaudRate** to **115200**. {{ :pidflightlap:dt-06_serial.png?direct&360 |}} |
- Navigate to **Module** -> **WiFi**, you can optionally change the **SSID Name** and **Password**. {{ :pidflightlap:dt-06_wifi.png?direct&360 |}} | - Navigate to **Module** -> **WiFi**, you can optionally change the **SSID Name** and **Password**. {{ :pidflightlap:dt-06_wifi.png?direct&360 |}} | ||
- Navigate to **Module** -> **Networks**, set **Socket Type** to **TCP Server** and **TCP Server Local Port** to **23**. {{ :pidflightlap:dt-06_network.png?direct&360 |}} | - Navigate to **Module** -> **Networks**, set **Socket Type** to **TCP Server** and **TCP Server Local Port** to **23**. {{ :pidflightlap:dt-06_network.png?direct&360 |}} |