nRF24 multi-protocol RC transmitter

This is a simplified build of goebish's nRF24 multi-protocol RC transmitter for OpenTX enabled transmitters with external RF support such as the FrSky Taranis.

The Arduino Nano provides a 3.3v which makes it an ideal choice with the nRF24 module. However the nRF24L01 is 5v tolerant, it is preferable to use 3.3v from the Arduino to power it.

• 1x Ardunio Nano rev3.0
• 1x nRF24L01 transceiver module
• 1x 4cm x 6cm PCB prototype board
• 26 AWG wire

• https://github.com/goebish/nrf24_multipro/blob/master/README.md