User Tools

Site Tools


guide:smokestopper

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
guide:smokestopper [2016/04/10 22:26]
admin [Parts]
guide:smokestopper [2016/05/25 19:02] (current)
cmengler [Steps]
Line 5: Line 5:
  
 ===== Parts ===== ===== Parts =====
-  ​* 1x 12v 20w (at minimum) ​halogen or suitable globe+{{ :​guide:​smoke_stopper_parts.jpg?​400 |}} 
 + 
 +  ​* 1x 12v 20w halogen or suitable globe
   * 1x XT60 male connector   * 1x XT60 male connector
   * 1x XT60 female connector   * 1x XT60 female connector
Line 12: Line 14:
   * 6x heat shrink pieces   * 6x heat shrink pieces
  
- +//NOTE: 12v 20W globe will limit the current to ~1.6A, this is generally enough to power up a quadcopter with FPV gear (and maybe idle motors).//
- +
  
 ===== Steps ===== ===== Steps =====
 +  - Solder and heatshrink one length of the red wire onto the positive XT60 male connector.
 +  - Solder and heatshrink one length of the red wire onto the positive XT60 female connector.
 +  - Push one leg of the 12v globe into one length of red wire and solder and heatshrink, repeat using the remaining red wire and other leg of the 12v globe.
 +  - Solder one length of the black wire from the negative XT60 male connector to the negative XT60 female connector.
  
 +{{ :​guide:​smoke_stopper_complete.jpg?​400 |}}
  
 ===== References ===== ===== References =====
   * http://​www.rcgroups.com/​forums/​showthread.php?​t=2327875 (credit: mnemennth)   * http://​www.rcgroups.com/​forums/​showthread.php?​t=2327875 (credit: mnemennth)
guide/smokestopper.1460291193.txt.gz · Last modified: 2016/04/11 20:52 (external edit)