This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
pidflightlap:ethernet [2018/06/10 10:02] cmengler [How to setup Ethernet module for lap timing device] |
pidflightlap:ethernet [2018/06/10 10:05] (current) cmengler [How to setup Ethernet module for lap timing device] |
||
---|---|---|---|
Line 7: | Line 7: | ||
{{ :pidflightlap:pidflightlap_enc28j60_shield.png?400 |}} | {{ :pidflightlap:pidflightlap_enc28j60_shield.png?400 |}} | ||
- | - Flash the PIDflight Lap Ethernet firmware to the Arduino Nano to be used for the ENC28J60 Ethernet Shield. Refer to [[pidflight:flashingfirmware|Flashing firmware to lap timing device]], same process applies for flashing HEX files to Arduino. | + | - Flash the PIDflight Lap Ethernet firmware ({{:pidflightlap:pidflightlap_ethernet_0.0.1.zip|Download}}) to the Arduino Nano to be used for the ENC28J60 Ethernet Shield. |
- Configure your PC wired network connection.<code> | - Configure your PC wired network connection.<code> | ||
Static IP: 192.168.4.60 | Static IP: 192.168.4.60 |