✎ pidflightlap:protocol [rotorOverflow]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== PIDflight Lap Protocol ======
The PIDflight Lap protocol uses a slightly modified version of the [[http://www.multiwii.com/wiki/index.php?title=Multiwii_Serial_Protocol|Multiwii Serial Protocol]].

===== Notes =====
  * By default all lap timers are activated on power up. (i.e. do not require **MSP_ACTIVATE** to be sent)

===== Getting started =====
  * Open serial connection to lap timing device(s).
    * **Baud rate**: 115200
  * Application issues **MSP_SET_DEVICE_ID** to __all__ devices.<code c++>
// Initialise all connected devices identifiers starting with 1
MSP.sendMessage(MSP.WILDCARD_DEVICE_ID, MSP.MSP_SET_DEVICE_ID, 1);
</code>
  * Each device found and initialised will return a response to **MSP_SET_DEVICE_ID** with the **ID** it has been initialised with.
  * Poll **MSP_CURRENT_LAP** to detect when a new lap has been recorded on the lap timer.
  * Poll **MSP_STATUS** to retrieve current status of the lap timer.

===== MSP message format =====
{{:pidflightlap:msp_message_format.png?nolink&800|}}

===== MSP codes =====
^Name^Code^Description^
|MSP_API_VERSION|1|Firmware API version|
|MSP_STATUS|4|Device and lap timing status|
|MSP_RESET|5|Resets device and lap timing state|
|MSP_RSSI_CALIBRATE|6| |
|MSP_START|7| |
|MSP_ACTIVATE|8| |
|MSP_DEACTIVATE|9| |
|MSP_DEVICE_ID|10| |
|MSP_SET_DEVICE_ID|11| |
|MSP_CHANNEL|20| |
|MSP_SET_CHANNEL|21| |
|MSP_CURRENT_LAP|30| |
|MSP_LAP_MIN_TIME|34| |
|MSP_SET_LAP_MIN_TIME|35| |
|MSP_LAP_MAX|37| |
|MSP_SET_LAP_MAX|38| |
|MSP_RSSI|40| |
|MSP_RSSI_THRESHOLD|42| |
|MSP_SET_RSSI_THRESHOLD|43| |
|<del>MSP_RSSI_FILTER</del>|44|TBD|
|<del>MSP_SET_RSSI_FILTER</del>|45|TBD|
|MSP_EEPROM_WRITE|250|Persists settings to EEPROM for settings to survive a power cycle (if desired)|

==== MSP_API_VERSION ====
^Part^Type^Description^
|1|UINT 8|Major version|
|2|UINT 8|Minor version|
Version is constructed as [PART 1][DECIMAL][PART2][DECIMAL][ZERO] (e.g. 2.6.0)

==== MSP_STATUS ====
^Part^Type^Description^
|1|UINT 8|Device state|
|2|UINT 8|Timer state|

=== Device states ===
^Value^State^
|0|Idle|
|1|Timing|
|2|Calibrating|
|3|Inactive|

=== Timer states ===
^Value^State^
|0|Waiting|
|1|Start|
|2|Stop|
User Tools

Site Tools

Page Tools
