This shows you the differences between two versions of the page.
Next revision | Previous revision Next revision Both sides next revision | ||
pidflightlap:wifi [2017/08/16 10:53] cmengler created |
pidflightlap:wifi [2017/08/16 11:21] cmengler |
||
---|---|---|---|
Line 6: | Line 6: | ||
By default the DT-06 module is set to **9600** baud rate and TCP port **9000**. The DT-06 module must be configured to **115200** baud rate. | By default the DT-06 module is set to **9600** baud rate and TCP port **9000**. The DT-06 module must be configured to **115200** baud rate. | ||
+ | - Power up the lap timing device with the DT-06 module connected. | ||
+ | - Connect to the WiFi network (by default it will be called "Doit_WiFi_XXXXXX"). | ||
+ | - Open your web browser to **http://192.168.4.1** {{ :pidflightlap:dt-06_main.png?direct&360 |}} | ||
+ | - Navigate to **Module** -> **Serial**, set the **BaudRate** to **115200** {{ :pidflightlap:dt-06_serial.png?direct&360 |}} | ||
+ | - Navigate to **Module** -> **WiFi**, you can optionally change the **SSID Name** and **Password**. {{ :pidflightlap:dt-06_wifi.png?direct&360 |}} | ||
+ | - Navigate to **Module** -> **Networks**, set **Socket Type** to **TCP Server** and **TCP Server Local Port** to **23**. {{ :pidflightlap:dt-06_network.png?direct&360 |}} | ||
+ | - Navigate to **More** -> **Restart**, for settings to take affect the DT-06 module must be restarted. | ||
+ | - All done! | ||
+ | |||
+ | ==== Pin-outs ==== | ||
+ | |||
+ | ^Arduino^DT-06^ | ||
+ | |5V|VCC| | ||
+ | |GND|GND| | ||
+ | |RX|TX| | ||
+ | |TX|RX| | ||
===== ESP01 serial adapter ===== | ===== ESP01 serial adapter ===== | ||
//To be completed.// | //To be completed.// |